NRH2412T100MNGH
更新时间:2024-09-18 21:49:41
品牌:TAIYO YUDEN
描述:SMD POWER INDUCTORS(NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE)
NRH2412T100MNGH 概述
SMD POWER INDUCTORS(NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE)
NRH2412T100MNGH 数据手册
通过下载NRH2412T100MNGH数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-
porating such products, which are caused under the conditions other than those specified in this catalog or indi-
vidual specification.
■ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad-
vance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
SMD POWER INDUCTORS(NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE)
REFLOW
■PARTS NUMBER
*Operating Temp. : -25~+120℃ (NRS40/50/60/80 : -25~+125℃) (Including self-generated heat)
△=Blank space
N
R △
①
4
0
1
8
T △
③
1
0
0
M
△
⑥
②
④
⑤
①Series name
Code
③Packaging
Series name
Code
T△
Packaging
Taping
NR△
NRH
Coating resin specification
④Nominal inductance
NRS
Code
NRV
Nominal inductance[μH]
(example)
2R2
2.2
10
②Dimensions(L×W×H)
100
101
Code
2010
2012
2410
2412
3010
3012
3015
4010
4012
4018
5010
5012
5014
5020
5024
5030
5040
6010
6012
6014
6020
6028
6045
8030
8040
Dimensions(L×W×H)[mm]
2.0×2.0×1.0
2.0×2.0×1.2
2.4×2.4×1.0
2.4×2.4×1.2
3.0×3.0×1.0
3.0×3.0×1.2
3.0×3.0×1.5
4.0×4.0×1.0
4.0×4.0×1.2
4.0×4.0×1.8
4.9×4.9×1.0
4.9×4.9×1.2
4.9×4.9×1.4
4.9×4.9×2.0
4.9×4.9×2.4
4.9×4.9×3.0
4.9×4.9×4.0
6.0×6.0×1.0
6.0×6.0×1.2
6.0×6.0×1.4
6.0×6.0×2.0
6.0×6.0×2.8
6.0×6.0×4.5
8.0×8.0×3.0
8.0×8.0×4.0
100
※R=Decimal point
/
⑤Inductance tolerance
Code
M
Inductance tolerance
±20%
N
±30%
⑥Internal code
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
Recommended Land Patterns
Type
A
B
C
B
L
H
NRV2010,
0.65
0.7
1.35
2.0
NRS2012, NRV2012
NRH2410
e
e
1.45
2.2
2.0
2.7
C
NRH2412
W
f
NR 3010, NRH3010
NR 3012, NRH3012, NRV3012
NR 3015, NRS3015
NR 4010, NRS4010
NR 4012, NRS4012
NR 4018, NRS4018
NRS8030
0.8
A
A
1.2
1.8
2.8
5.6
3.7
7.5
NR 8040, NRS8040
Unit:mm
Standard quantity
Type
L
W
H
e
f
[pcs] Taping
2.0±0.1
2.0±0.1
1.0 max
0.5±0.2
1.25±0.2
NRV2010
2500
(0.079±0.004) (0.079±0.004)
2.0±0.1 2.0±0.1
(0.079±0.004) (0.079±0.004)
2.4±0.1 2.4±0.1
(0.095±0.004) (0.095±0.004)
2.4±0.1 2.4±0.1
(0.095±0.004) (0.095±0.004)
3.0±0.1 3.0±0.1
(0.118±0.004) (0.118±0.004)
(0.039 max)
1.2 max
(0.020±0.008) (0.050±0.008)
0.5±0.2 1.25±0.2
(0.020±0.008) (0.050±0.008)
0.6±0.2 1.45±0.2
(0.024±0.008) (0.057±0.008)
0.6±0.2 1.45±0.2
(0.024±0.008) (0.057±0.008)
0.9±0.2 1.9±0.2
(0.035±0.008) (0.075±0.008)
NRS2012
NRV2012
2500
2500
2500
2000
(0.047 max)
1.0 max
NRH2410
NRH2412
(0.039 max)
1.2 max
(0.047 max)
1.0 max
NR 3010
NRH3010
(0.039 max)
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
38
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
NR 4010
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
3.0±0.1
3.0±0.1
1.2 max
0.9±0.2
1.9±0.2
2000
(0.118±0.004) (0.118±0.004)
(0.047 max)
(0.035±0.008) (0.075±0.008)
3.0±0.1
(0.118±0.004) (0.118±0.004)
4.0±0.2 4.0±0.2
(0.157±0.008) (0.157±0.008)
4.0±0.2 4.0±0.2
(0.157±0.008) (0.157±0.008)
4.0±0.2 4.0±0.2
(0.157±0.008) (0.157±0.008)
8.0±0.2 8.0±0.2
(0.315±0.008) (0.315±0.008)
3.0±0.1
1.5 max
(0.059 max)
1.0 max
0.9±0.2
(0.035±0.008) (0.075±0.008)
1.1±0.2 2.5±0.2
(0.043±0.008) (0.098±0.008)
1.1±0.2 2.5±0.2
(0.043±0.008) (0.098±0.008)
1.1±0.2 2.5±0.2
(0.043±0.008) (0.098±0.008)
1.9±0.2
2000
5000
4500
3500
1000
(0.039 max)
1.2 max
(0.047 max)
1.8 max
(0.071 max)
3.0 max
1.60±0.3
5.6±0.3
NRS8030
(0.118 max)
*1) 4.2 max
(0.165 max)
(0.063±0.012)
(0.22±0.012)
NR 8040
NRS8040
8.0±0.2
8.0±0.2
1.60±0.3
5.6±0.3
1000
(0.315±0.008) (0.315±0.008) *2) 4.0 max
(0.157 max)
(0.063±0.012)
(0.22±0.012)
*1)0R9~6R8 type,
*2)100~101type
Unit:mm(inch)
Recommended Land Patterns
Type
NRS5010
A
B
C
L
B
ΔI
H
NRS5012
e
e
NRS5014
C
NRS5020
1.5
3.6
4.0
/
W
f
NRS5024
NRS5030
NR 5040, NRS5040
NRS6010
A
A
NR 6012, NRS6012
NRS6014
1.6
4.7
5.7
NR 6020, NRS6020
NR 6028, NRS6028
NR 6045, NRS6045
Unit:mm
Standard quantity
[pcs] Taping
Type
NRS5010
NRS5012
NRS5014
NRS5020
L
W
H
e
f
Δl
4.9±0.2
4.9±0.2
1.0 max
1.2±0.2
(0.047±0.008) (0.130±0.008)
1.2±0.2 3.3±0.2
(0.047±0.008) (0.130±0.008)
1.2±0.2 3.3±0.2
(0.047±0.008) (0.130±0.008)
1.2±0.2 3.3±0.2
(0.047±0.008) (0.130±0.008)
3.3±0.2
1.3typ
1000
1000
1000
800
(0.193±0.008) (0.193±0.008)
4.9±0.2 4.9±0.2
(0.193±0.008) (0.193±0.008)
4.9±0.2 4.9±0.2
(0.193±0.008) (0.193±0.008)
4.9±0.2 4.9±0.2
(0.193±0.008) (0.193±0.008)
(0.039 max)
1.2 max
(0.051typ)
1.3typ
(0.047 max)
1.4 max
(0.051typ)
1.3typ
(0.055 max)
2.0 max
(0.051typ)
1.3typ
(0.079 max)
*3) 2.5 max
(0.098 max)
*4) 2.4 max
(0.094 max)
*5) 3.1 max
(0.122 max)
*6) 3.0 max
(0.118 max)
(0.051typ)
4.9±0.2
4.9±0.2
1.2±0.2
3.3±0.2
1.3typ
2500
NRS5024
NRS5030
(0.193±0.008) (0.193±0.008)
(0.047±0.008) (0.130±0.008)
(0.051typ)
4.9±0.2
4.9±0.2
1.2±0.2
3.3±0.2
1.3typ
500
(0.193±0.008) (0.193±0.008)
(0.047±0.008) (0.130±0.008)
(0.051typ)
*7) 4.1 max
(0.161 max)
NR 5040
NRS5040
4.9±0.2
4.9±0.2
1.2±0.2
3.3±0.2
1.3typ
1500
(0.193±0.008) (0.193±0.008) *8) 4.0 max
(0.157 max)
(0.047±0.008) (0.130±0.008)
(0.051typ)
6.0±0.2
(0.236±0.008) (0.236±0.008)
6.0±0.2 6.0±0.2
(0.236±0.008) (0.236±0.008)
6.0±0.2 6.0±0.2
(0.236±0.008) (0.236±0.008)
6.0±0.2 6.0±0.2
(0.236±0.008) (0.236±0.008)
6.0±0.2 6.0±0.2
(0.236±0.008) (0.236±0.008)
6.0±0.2 6.0±0.2
6.0±0.2
1.0 max
(0.039 max)
1.2 max
1.35±0.2
(0.053±0.008) (0.157±0.008)
1.35±0.2 4.0±0.2
(0.053±0.008) (0.157±0.008)
1.35±0.2 4.0±0.2
(0.053±0.008) (0.157±0.008)
1.35±0.2 4.0±0.2
(0.053±0.008) (0.157±0.008)
1.35±0.2 4.0±0.2
(0.053±0.008) (0.157±0.008)
1.35±0.2 4.0±0.2
(0.053±0.008) (0.157±0.008)
4.0±0.2
2.3typ
(0.091typ)
2.3typ
NRS6010
1000
1000
1000
2500
2000
NR 6012
NRS6012
(0.047 max)
1.4 max
(0.091typ)
2.3typ
NRS6014
(0.055 max)
2.0 max
(0.091typ)
2.3typ
NR 6020
NRS6020
(0.079 max)
2.8 max
(0.091typ)
2.3typ
NR 6028
NRS6028
(0.110 max)
4.5 max
(0.091typ)
2.3typ
NR 6045
1500
NRS6045
(0.236±0.008) (0.236±0.008)
*4)2R2~330 type
(0.177 max)
(0.091typ)
*3)1R0~1R5 type,
*5)R47~100 type,
*7)1R5~100 type,
Unit:mm(inch)
*6)150~470 type
*8)150~470 type
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
39
■PARTS NUMBER
●NRS2012 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Saturation current
Temperature rise current
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Idc2
Idc1
1,900
1,650
1,350
1,000
900
NRS2012T 1R0N GJ
NRS2012T 1R5N GJ
NRS2012T 2R2M GJ
NRS2012T 3R3M GJ
NRS2012T 4R7M GJ
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
±30%
±30%
±20%
±20%
±20%
-
-
-
-
-
0.070
0.090
0.107
0.190
0.241
1,700
1,500
1,370
1,020
910
100
100
100
100
100
●NRV2010 type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRV2010T R47N GF
NRV2010T R68N GF
NRV2010T 1R0N GF
NRV2010T 1R5M GF
NRV2010T 2R2M GF
NRV2010T 3R3M GF
NRV2010T 4R7M GF
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
0.68
1.0
±30%
±30%
±30%
±20%
±20%
±20%
±20%
-
-
-
-
-
-
-
0.052
0.060
0.080
0.100
0.175
0.250
0.320
2,100
1,850
1,550
1,350
1,100
880
2,000
1,850
1,600
1,450
1,100
1,000
820
100
100
100
100
100
100
100
1.5
2.2
3.3
4.7
760
●NRV2012 type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRV2012T 1R0N GF
NRV2012T 1R5N GF
NRV2012T 2R2M GF
NRV2012T 3R3M GF
NRV2012T 4R7M GF
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
±30%
±30%
±20%
±20%
±20%
-
-
-
-
-
0.073
0.100
0.129
0.227
0.325
2,200
1,800
1,600
1,250
1,100
1,650
1,400
1,200
900
100
100
100
100
100
/
750
●NRH2410 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRH2410T R68NN 4
NRH2410T 1R0NN 4
NRH2410T 1R5MN
NRH2410T 2R2MN
NRH2410T 3R3MN
NRH2410T 4R7MN
NRH2410T 6R8MN
NRH2410T 100MN
NRH2410T 150MN
NRH2410T 220MN
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
120
106
94
0.060
0.070
0.110
0.150
0.220
0.290
0.410
0.690
1.02
2,200
1,800
1,550
1,290
1,000
880
1,570
1,410
1,160
970
100
100
100
100
100
100
100
100
100
100
77
56
770
50
670
43
750
570
32
550
450
15
27
470
370
22
22
1.47
390
300
●NRH2412 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRH2412T R47NNGJ
NRH2412T 1R0NNGH
NRH2412T 1R5NNGH
NRH2412T 2R2MNGH
NRH2412T 3R3MNGH
NRH2412T 4R7MNGH
NRH2412T 6R8MNGH
NRH2412T 100MNGH
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
180
101
89
0.050
0.077
0.100
0.140
0.225
0.300
0.420
0.600
2,900
2,350
2,100
1,700
1,400
1,150
950
2,100
1,300
1,150
1,000
750
100
100
100
100
100
100
100
100
72
56
45
650
34
550
29
810
450
●NRH3010 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRH3010T 1R2NN
NRH3010T 1R5NN
NRH3010T 2R2MN
NRH3010T 3R3MN
NRH3010T 4R7MN
NRH3010T 6R8MN
NRH3010T 100MN
NRH3010T 150MN
NRH3010T 220MN
NRH3010T 470MN
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.2
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
120
99
86
64
50
44
34
25
22
17
0.065
0.075
0.083
0.130
0.170
0.250
0.350
0.550
0.770
2.050
1,700
1,440
1,300
1,000
850
1,480
1,370
1,300
1,030
900
100
100
100
100
100
100
100
100
100
100
700
745
600
620
15
450
480
22
380
410
47
250
285
※) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
40
■PARTS NUMBER
●NRH3012 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Saturation current
Temperature rise current
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Idc2
Idc1
2,600
2,200
1,700
1,500
1,200
1,000
850
NRH3012T R47NN
NRH3012T 1R0NN
NRH3012T 1R5NN
NRH3012T 2R2MN
NRH3012T 3R3MN
NRH3012T 4R7MN
NRH3012T 6R8MN
NRH3012T 100MN
NRH3012T 150MN
NRH3012T 220MN
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
160
111
95
0.033
0.048
0.055
0.075
0.100
0.130
0.190
0.270
0.450
0.630
1,900
1,710
1,600
1,370
1,210
1,060
890
100
100
100
100
100
100
100
100
100
100
78
61
50
43
32
730
720
15
26
530
570
22
22
500
500
●NRV3012 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRV3012T 1R0N
NRV3012T 1R5N
NRV3012T 2R2M
NRV3012T 3R3M
NRV3012T 4R7M
NRV3012T 6R8M
NRV3012T 100M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
110
92
70
55
48
40
32
0.065
0.075
0.120
0.150
0.190
0.300
0.470
2,500
2,100
1,800
1,600
1,250
950
1,600
1,400
1,100
1,000
850
100
100
100
100
100
100
100
650
800
550
/
●NRS3015 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS3015T 1R0NNGH
NRS3015T 1R5NNGH
NRS3015T 2R2MNGH
NRS3015T 3R3MNGH
NRS3015T 4R7MNGH
NRS3015T 6R8MNGH
NRS3015T 100MNGH
NRS3015T 220MNGH
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
100
87
64
49
40
36
28
20
0.030
0.038
0.058
0.078
0.120
0.160
0.220
0.520
2,100
1,800
1,480
1,210
1,020
870
2,100
1,820
1,500
1,230
1,040
880
100
100
100
100
100
100
100
100
700
710
22
470
470
●NRS4010 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS4010T 1R0NDGG
NRS4010T 2R2MDGG
NRS4010T 3R3MDGG
NRS4010T 4R7MDGG
NRS4010T 6R8MDGG
NRS4010T 100MDGG
NRS4010T 150MDGG
NRS4010T 220MDGG
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
116
73
58
47
38
31
24
19
0.056
0.085
0.100
0.140
0.200
0.300
0.430
0.570
2,000
1,200
1,100
950
1,900
1,500
1,400
1,200
1,000
750
100
100
100
100
100
100
100
100
800
620
15
540
600
22
450
500
●NRS4012 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS4012T 1R0NDGG
NRS4012T 2R2MDGJ
NRS4012T 3R3MDGJ
NRS4012T 4R7MDGJ
NRS4012T 6R8MDGJ
NRS4012T 100MDGJ
NRS4012T 150MDGJ
NRS4012T 220MDGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100
70
60
45
35
30
24
18
0.042
0.060
0.070
0.095
0.125
0.170
0.260
0.400
2,800
1,650
1,400
1,200
900
2,200
1,900
1,700
1,500
1,300
1,100
750
100
100
100
100
100
100
100
100
800
15
650
22
500
620
※) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
41
■PARTS NUMBER
●NRS4018 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Saturation current
Temperature rise current
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Idc2
Idc1
4,000
3,000
2,300
2,000
1,600
1,300
1,100
900
NRS4018T 1R0NDGJ
NRS4018T 2R2MDGJ
NRS4018T 3R3MDGJ
NRS4018T 4R7MDGJ
NRS4018T 6R8MDGJ
NRS4018T 100MDGJ
NRS4018T 150MDGJ
NRS4018T 220MDGJ
NRS4018T 330MDGJ
NRS4018T 470MDGJ
NRS4018T 680MDGJ
NRS4018T 101MDGJ
NRS4018T 151MDGJ
NRS4018T 221MDGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
90
60
45
35
30
25
18
15
12
10
8.3
6.5
5.5
4.0
0.027
0.042
0.055
0.070
0.098
0.150
0.210
0.290
0.460
0.650
1.00
3,200
2,200
2,000
1,700
1,450
1,200
850
100
100
100
100
100
100
100
100
100
100
100
100
100
100
15
22
720
33
700
550
47
600
440
68
520
320
100
150
220
1.45
420
280
2.30
340
220
3.80
275
170
●NRS5010 type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS5010T 1R0NMGF
NRS5010T 2R2NMGF
NRS5010T 3R3MMGF
NRS5010T 4R7MMGF
NRS5010T 6R8MMGF
NRS5010T 100MMGF
NRS5010T 150MMGF
NRS5010T 220MMGF
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
95
65
42
37
33
23
19
15
0.070
0.105
0.125
0.145
0.185
0.250
0.400
0.600
2,350
1,500
1,400
1,200
1,000
850
1,750
1,400
1,250
1,150
1,000
900
100
100
100
100
100
100
100
100
/
15
680
650
22
550
450
●NRS5012 type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS5012T 1R0NMGF
NRS5012T 1R5NMGF
NRS5012T 2R2MMGF
NRS5012T 3R3MMGF
NRS5012T 4R7MMGF
NRS5012T 6R8MMGF
NRS5012T 100MMGF
NRS5012T 150MMGF
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
100
86
70
48
40
36
26
22
0.053
0.070
0.085
0.160
0.180
0.260
0.420
0.670
4,500
3,800
3,100
2,400
2,200
1,700
1,400
1,200
2,300
2,200
2,000
1,450
1,400
1,100
850
100
100
100
100
100
100
100
100
15
640
●NRS5014 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS5014T R47NMGG
NRS5014T 1R2NMGG
NRS5014T 2R2NMGG
NRS5014T 3R3NMGG
NRS5014T 4R7NMGG
NRS5014T 6R8MMGG
NRS5014T 100MMGG
NRS5014T 150MMGG
NRS5014T 220MMGG
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
1.2
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
185
86
56
48
41
33
27
20
16
0.025
0.045
0.065
0.080
0.100
0.150
0.200
0.320
0.450
5,800
3,800
2,800
2,350
2,050
1,600
1,400
1,100
900
3,300
2,400
2,000
1,700
1,400
1,200
1,050
650
100
100
100
100
100
100
100
100
100
15
22
550
●NRS5020 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS5020T R47NMGJ
NRS5020T 1R0NMGJ
NRS5020T 1R5NMGJ
NRS5020T 2R2NMGJ
NRS5020T 3R3NMGJ
NRS5020T 4R7MMGJ
NRS5020T 6R8MMGJ
NRS5020T 100MMGJ
NRS5020T 150MMGJ
NRS5020T 220MMGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
230
81
68
57
46
37
30
24
20
17
0.012
0.021
0.026
0.035
0.048
0.060
0.090
0.120
0.165
0.260
6,100
4,000
3,350
2,900
2,400
2,000
1,600
1,300
1,100
900
5,000
3,600
3,200
2,900
2,400
2,000
1,650
1,450
1,200
1,000
100
100
100
100
100
100
100
100
100
100
15
22
※) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
42
■PARTS NUMBER
●NRS5024 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Saturation current
Temperature rise current
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Idc2
Idc1
NRS5024T 1R0NMGJ
NRS5024T 1R5NMGJ
NRS5024T 2R2NMGJ
NRS5024T 3R3NMGJ
NRS5024T 4R7MMGJ
NRS5024T 6R8MMGJ
NRS5024T 100MMGJ
NRS5024T 150MMGJ
NRS5024T 220MMGJ
NRS5024T 330MMGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
85
67
51
41
37
28
21
18
15
11
0.016
0.022
0.029
0.043
0.055
0.080
0.125
0.170
0.230
0.370
5,800
5,200
4,100
3,100
2,700
2,200
1,700
1,400
1,200
1,000
4,400
3,600
3,100
2,400
2,000
1,600
1,200
1,000
820
100
100
100
100
100
100
100
100
100
100
15
22
33
630
●NRS5030 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±30%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS5030T R47NMGJ
NRS5030T 1R0NMGJ
NRS5030T 2R2NMGJ
NRS5030T 3R3MMGJ
NRS5030T 4R7MMGJ
NRS5030T 6R8MMGJ
NRS5030T 100MMGJ
NRS5030T 150MMGJ
NRS5030T 220MMGJ
NRS5030T 330MMGJ
NRS5030T 470MMGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.47
1.0
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
185
110
46
36
31
22
20
14
13
10
9
0.010
0.015
0.023
0.030
0.035
0.052
0.070
0.125
0.180
0.225
0.325
9,000
6,600
4,200
3,600
3,100
2,500
2,100
1,600
1,400
1,150
950
5,000
4,000
3,500
3,000
2,600
2,300
1,700
1,400
1,050
800
100
100
100
100
100
100
100
100
100
100
100
15
/
22
33
47
700
●NRS5040 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±30%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS5040T 1R5NMGJ
NRS5040T 2R2NMGJ
NRS5040T 3R3NMGJ
NRS5040T 4R7NMGK
NRS5040T 6R8MMGJ
NRS5040T 100MMGJ
NRS5040T 150MMGJ
NRS5040T 220MMGK
NRS5040T 330MMGJ
NRS5040T 470MMGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
60
42
32
28
21
18
13
9
0.017
0.022
0.027
0.029
0.049
0.056
0.080
0.126
0.180
0.310
6,400
5,000
4,000
3,300
2,800
2,300
2,000
1,500
1,300
1,100
4,500
3,700
3,300
3,100
2,400
2,100
1,800
1,400
1,200
900
100
100
100
100
100
100
100
100
100
100
15
22
33
7
47
6
●NRS6010 type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS6010T 1R5MMGF
NRS6010T 2R2MMGF
NRS6010T 3R3MMGF
NRS6010T 4R7MMGF
NRS6010T 6R8MMGF
NRS6010T 100MMGF
NRS6010T 220MMGF
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.5
2.2
3.3
4.7
6.8
10
±20%
±20%
±20%
±20%
±20%
±20%
±20%
77
56
42
36
30
25
12
0.090
0.110
0.135
0.165
0.220
0.270
0.580
2,400
1,900
1,600
1,300
1,200
1,000
650
1,900
1,700
1,500
1,400
1,200
1,100
700
100
100
100
100
100
100
100
22
●NRS6012 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS6012T 1R0NMGJ
NRS6012T 1R5NMGG
NRS6012T 2R5NMGG
NRS6012T 3R3NMGG
NRS6012T 4R7MMGG
NRS6012T 5R3MMGJ
NRS6012T 6R8MMGJ
NRS6012T 100MMGJ
NRS6012T 150MMGJ
NRS6012T 220MMGJ
NRS6012T 330MMGJ
NRS6012T 470MMGJ
NRS6012T 680MMGJ
NRS6012T 101MMGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.5
3.3
4.7
5.3
6.8
10
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
95
69
45
42
36
34
30
22
18
12
8
0.050
0.067
0.090
0.105
0.125
0.125
0.165
0.200
0.295
0.465
0.580
0.965
1.16
3,000
2,600
2,100
1,800
1,600
1,500
1,300
1,000
800
2,400
2,100
1,800
1,700
1,550
1,550
1,350
1,200
800
100
100
100
100
100
100
100
100
100
100
100
100
100
100
15
22
760
650
33
590
550
47
6
520
460
68
3
440
410
100
1
1.67
350
320
※) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
43
■PARTS NUMBER
●NRS6014 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Saturation current
Temperature rise current
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Idc2
Idc1
4,000
3,000
2,500
2,000
1,700
1,400
1,150
950
NRS6014T 1R2NMGG
NRS6014T 2R2NMGG
NRS6014T 3R3NMGG
NRS6014T 4R7MMGG
NRS6014T 6R8MMGG
NRS6014T 100MMGG
NRS6014T 150MMGG
NRS6014T 220MMGG
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.2
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
77
61
41
36
30
24
20
16
0.042
0.055
0.075
0.090
0.115
0.140
0.210
0.300
2,750
2,300
2,000
1,900
1,650
1,400
1,200
1,000
100
100
100
100
100
100
100
100
15
22
●NRS6020 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS6020T 0R8NMGG
NRS6020T 1R5NMGJ
NRS6020T 2R2NMGJ
NRS6020T 3R3NMGJ
NRS6020T 4R7NMGJ
NRS6020T 6R8NMGJ
NRS6020T 100MMGG
NRS6020T 220MMGG
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.8
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±30%
±30%
±30%
±20%
±20%
110
93
73
55
43
30
18
11
0.020
0.026
0.034
0.040
0.058
0.085
0.125
0.290
6,400
4,300
3,200
2,800
2,400
2,000
1,900
1,250
4,100
3,600
2,900
2,750
2,150
1,800
1,500
950
100
100
100
100
100
100
100
100
22
●NRS6028 Shielded type
Parts number
/
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±30%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS6028T 0R9NMGJ
NRS6028T 1R5NMGJ
NRS6028T 2R2NMGJ
NRS6028T 3R0NMGJ
NRS6028T 4R7MMGK
NRS6028T 6R8MMGJ
NRS6028T 100MMGK
NRS6028T 150MMGJ
NRS6028T 220MMGJ
NRS6028T 330MMGJ
NRS6028T 470MMGJ
NRS6028T 680MMGJ
NRS6028T 101MMGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.9
1.5
2.2
3.0
4.7
6.8
10
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
90
78
68
55
39
25
20
17
12
10
8
0.013
0.016
0.020
0.023
0.031
0.043
0.065
0.095
0.135
0.220
0.300
0.420
0.600
6,700
5,100
4,200
3,600
2,700
2,600
1,900
1,600
1,300
1,100
1,000
800
4,600
4,200
3,700
3,400
3,000
2,500
1,900
1,800
1,400
1,100
920
100
100
100
100
100
100
100
100
100
100
100
100
100
15
22
33
47
68
5
770
100
3
650
660
●NRS6045 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±30%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS6045T 1R0NMGK
NRS6045T 1R3NMGK
NRS6045T 1R8NMGK
NRS6045T 2R3NMGK
NRS6045T 3R0NMGK
NRS6045T 4R5MMGK
NRS6045T 6R3MMGK
NRS6045T 100MMGK
NRS6045T 150MMGK
NRS6045T 220MMGK
NRS6045T 330MMGK
NRS6045T 470MMGK
NRS6045T 680MMGK
NRS6045T 101MMGK
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.3
1.8
2.3
3.0
4.5
6.3
10
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
110
95
80
60
45
25
15
12
10
7
0.014
0.016
0.019
0.022
0.024
0.030
0.036
0.046
0.070
0.107
0.141
0.211
0.304
0.466
9,800
8,200
7,200
6,400
5,600
4,400
3,600
3,100
2,500
2,000
1,650
1,400
1,100
900
4,500
4,200
3,900
3,600
3,300
3,100
3,000
2,400
1,900
1,600
1,400
1,150
950
100
100
100
100
100
100
100
100
100
100
100
100
100
100
15
22
33
6
47
5
68
4
100
3
750
●NRS8030 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±30%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NRS8030T 1R0NJGJ
NRS8030T 1R5NJGJ
NRS8030T 2R2NJGJ
NRS8030T 3R3MJGJ
NRS8030T 4R7MJGJ
NRS8030T 6R8MJGJ
NRS8030T 100MJGJ
NRS8030T 150MJGJ
NRS8030T 220MJGJ
NRS8030T 330MJGJ
NRS8030T 470MJGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
120
80
60
50
40
32
27
20
16
13
11
0.009
0.012
0.015
0.019
0.022
0.029
0.033
0.060
0.070
0.120
0.170
7,800
6,200
4,900
4,200
3,600
3,000
2,400
2,000
1,750
1,300
1,100
6,200
5,300
4,800
4,300
4,000
3,400
3,000
2,200
1,900
1,500
1,300
100
100
100
100
100
100
100
100
100
100
100
15
22
33
47
※) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
44
■PARTS NUMBER
●NRS8040 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Saturation current
Temperature rise current
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±30%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Idc2
Idc1
13,000
10,000
8,100
6,400
5,400
4,400
3,800
2,900
2,400
2,000
1,500
1,100
NRS8040T 0R9NJGJ
NRS8040T 1R4NJGJ
NRS8040T 2R0NJGJ
NRS8040T 3R6NJGJ
NRS8040T 4R7NJGJ
NRS8040T 6R8NJGJ
NRS8040T 100MJGJ
NRS8040T 150MJGJ
NRS8040T 220MJGJ
NRS8040T 330MJGK
NRS8040T 470MJGJ
NRS8040T 101MJGJ
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.9
1.4
2.0
3.6
4.7
6.8
10
±30%
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
85
63
50
34
30
24
22
16
13
12
8
0.006
0.007
0.009
0.015
0.018
0.025
0.034
0.050
0.066
0.100
0.140
0.280
7,800
7,000
6,300
4,900
4,100
3,700
3,100
2,400
2,200
1,700
1,500
1,000
100
100
100
100
100
100
100
100
100
100
100
100
15
22
33
47
100
6
●NR 3010 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NR 3010T 1R0N
NR 3010T 1R5N
NR 3010T 2R2M
NR 3010T 3R3M
NR 3010T 4R7M
NR 3010T 6R8M
NR 3010T 100M
NR 3010T 150M
NR 3010T 220M
NR 3010T 330M
NR 3010T 470M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
126
98
82
63
56
46
35
30
25
20
17
0.065
0.080
0.095
0.140
0.190
0.300
0.450
0.740
1.03
1,300
1,200
1,100
870
1,400
1,300
1,100
940
100
100
100
100
100
100
100
100
100
100
100
750
780
610
630
/
500
510
15
400
400
22
350
350
33
1.55
260
275
47
2.05
220
235
●NR 3012 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NR 3012T 1R0N
NR 3012T 1R5N
NR 3012T 2R2M
NR 3012T 3R3M
NR 3012T 4R7M
NR 3012T 6R8M
NR 3012T 100M
NR 3012T 150M
NR 3012T 220M
NR 3012T 330M
NR 3012T 470M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
110
92
70
55
48
40
32
27
22
19
17
0.050
0.060
0.080
0.100
0.130
0.190
0.290
0.450
0.630
1.03
1,500
1,360
1,100
910
1,490
1,400
1,200
1,050
980
100
100
100
100
100
100
100
100
100
100
100
770
670
740
540
630
15
440
485
22
375
420
33
310
330
47
1.45
250
280
●NR 3015 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NR 3015T 1R0N
NR 3015T 1R5N
NR 3015T 2R2M
NR 3015T 3R3M
NR 3015T 4R7M
NR 3015T 6R8M
NR 3015T 100M
NR 3015T 150M
NR 3015T 220M
NR 3015T 330M
NR 3015T 470M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
100
87
64
49
40
36
28
23
20
18
17
0.030
0.040
0.060
0.080
0.120
0.160
0.230
0.360
0.520
0.840
1.34
2,100
1,800
1,480
1,210
1,020
870
2,100
1,820
1,500
1,230
1,040
880
100
100
100
100
100
100
100
100
100
100
100
700
710
15
560
560
22
470
470
33
390
370
47
320
300
●NR 4010 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NR 4010T 1R0N
NR 4010T 2R2N
NR 4010T 3R3M
NR 4010T 4R7M
NR 4010T 6R8M
NR 4010T 100M
NR 4010T 150M
NR 4010T 220M
NR 4010T 330M
NR 4010T 470M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
116
73
58
47
38
31
24
19
15
13
0.100
0.150
0.180
0.210
0.300
0.380
0.510
0.870
1.54
1,800
1,150
1,100
900
1,050
890
820
750
620
600
510
400
300
280
100
100
100
100
100
100
100
100
100
100
740
560
15
470
22
360
33
280
47
1.81
240
※) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
45
■PARTS NUMBER
●NR 4012 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Saturation current
Temperature rise current
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Idc2
Idc1
2,500
1,650
1,200
1,050
900
NR 4012T 1R0N
NR 4012T 2R2M
NR 4012T 3R3M
NR 4012T 4R7M
NR 4012T 6R8M
NR 4012T 100M
NR 4012T 150M
NR 4012T 220M
NR 4012T 330M
NR 4012T 470M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
131
66
50
45
35
28
23
18
15
12
0.060
0.090
0.130
0.140
0.180
0.240
0.400
0.480
0.810
1.00
1,500
1,200
980
960
840
770
600
540
420
370
100
100
100
100
100
100
100
100
100
100
740
15
560
22
510
33
400
47
350
●NR 4018 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NR 4018T 1R0N
NR 4018T 2R2M
NR 4018T 3R3M
NR 4018T 4R7M
NR 4018T 6R8M
NR 4018T 100M
NR 4018T 150M
NR 4018T 220M
NR 4018T 330M
NR 4018T 470M
NR 4018T 680M
NR 4018T 101M
NR 4018T 151M
NR 4018T 221M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
2.2
3.3
4.7
6.8
10
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
80
52
44
34
29
24
19
16
12
10
8.3
6.5
5.5
4.0
0.030
0.060
0.070
0.090
0.110
0.180
0.250
0.360
0.530
0.650
1.00
4,000
2,700
2,000
1,700
1,450
1,200
940
1,830
1,440
1,230
1,200
1,060
840
100
100
100
100
100
100
100
100
100
100
100
100
100
100
15
650
22
800
590
/
33
650
490
47
570
420
68
470
320
100
150
220
1.50
400
270
2.50
310
220
4.00
270
170
●NR 5040 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±30%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NR 5040T 1R5N
NR 5040T 2R2N
NR 5040T 3R3N
NR 5040T 4R7N
NR 5040T 6R8M
NR 5040T 100M
NR 5040T 150M
NR 5040T 220M
NR 5040T 330M
NR 5040T 470M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
60
42
32
28
21
18
13
9
0.020
0.022
0.027
0.029
0.049
0.056
0.080
0.126
0.180
0.310
6,000
4,600
3,800
3,300
2,600
2,300
2,000
1,600
1,300
1,100
3,600
3,500
3,300
3,100
2,300
2,100
1,800
1,400
1,200
900
100
100
100
100
100
100
100
100
100
100
15
22
33
7
47
6
●NR 6012 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NR 6012T 2R5NE
NR 6012T 4R0NE
NR 6012T 5R3ME
NR 6012T 6R8ME
NR 6012T 100ME
NR 6012T 150ME
NR 6012T 220ME
NR 6012T 330ME
NR 6012T 470ME
NR 6012T 680ME
NR 6012T 101ME
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
2.5
4.0
5.3
6.8
10
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
45
39
34
30
22
18
12
8
0.090
0.105
0.125
0.165
0.235
0.330
0.530
0.700
1.05
2,100
1,800
1,500
1,300
1,000
800
1,730
1,570
1,400
1,180
1,000
790
100
100
100
100
100
100
100
100
100
100
100
15
22
760
630
33
590
530
47
6
520
460
68
3
1.35
440
410
100
1
2.18
350
320
●NR 6020 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±20%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NR 6020T 0R8N
NR 6020T 1R5N
NR 6020T 2R2N
NR 6020T 3R3N
NR 6020T 4R7N
NR 6020T 6R8N
NR 6020T 100M
NR 6020T 220M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.8
1.5
2.2
3.3
4.7
6.8
10
±30%
±30%
±30%
±30%
±30%
±30%
±20%
±20%
110
93
73
55
43
30
18
11
0.020
0.026
0.034
0.040
0.058
0.085
0.125
0.290
5,500
4,000
3,200
2,800
2,400
2,000
1,700
1,050
3,800
3,200
2,700
2,600
2,000
1,800
1,400
950
100
100
100
100
100
100
100
100
22
※) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
46
■PARTS NUMBER
●NR 6028 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Saturation current
Temperature rise current
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±30%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Idc2
Idc1
6,600
5,000
4,200
3,600
2,700
2,500
1,900
1,600
1,300
1,100
950
NR 6028T 0R9N
NR 6028T 1R5N
NR 6028T 2R2N
NR 6028T 3R0N
NR 6028T 4R7M
NR 6028T 6R0M
NR 6028T 100M
NR 6028T 150M
NR 6028T 220M
NR 6028T 330M
NR 6028T 470M
NR 6028T 680M
NR 6028T 101M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.9
1.5
2.2
3.0
4.7
6.0
10
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
90
78
68
55
39
30
20
17
12
10
8
0.013
0.016
0.020
0.023
0.031
0.040
0.065
0.095
0.135
0.220
0.300
0.420
0.600
4,600
4,200
3,700
3,400
3,000
2,500
1,900
1,800
1,400
1,100
920
100
100
100
100
100
100
100
100
100
100
100
100
100
15
22
33
47
68
5
760
770
100
3
620
660
●NR 6045 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±30%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NR 6045T 1R0N
NR 6045T 1R3N
NR 6045T 1R8N
NR 6045T 2R3N
NR 6045T 3R0N
NR 6045T 4R5M
NR 6045T 6R3M
NR 6045T 100M
NR 6045T 150M
NR 6045T 220M
NR 6045T 330M
NR 6045T 470M
NR 6045T 680M
NR 6045T 101M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.3
1.8
2.3
3.0
4.5
6.3
10
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
110
95
80
60
45
25
15
12
10
7
0.014
0.016
0.018
0.021
0.024
0.031
0.038
0.047
0.077
0.115
0.145
0.220
0.330
0.500
8,500
8,000
7,000
6,000
5,000
4,000
3,800
3,000
2,300
1,900
1,500
1,300
1,000
800
4,200
4,000
3,700
3,500
3,200
3,000
2,800
2,500
1,900
1,500
1,400
1,100
900
100
100
100
100
100
100
100
100
100
100
100
100
100
100
/
15
22
33
6
47
5
68
4
100
3
700
●NR 8040 Shielded type
Parts number
Rated currentꢀ※)ꢀ[mA]
Self-resonant
frequency
[MHz](min.)
Nominal inductance
[μH]
DC Resistance
[Ω](±30%)
Measuring
frequency[kHz]
EHS
Inductance tolerance
Saturation current
Idc1
Temperature rise current
Idc2
NR 8040T 0R9N
NR 8040T 1R4N
NR 8040T 2R0N
NR 8040T 3R6N
NR 8040T 4R7N
NR 8040T 6R8N
NR 8040T 100M
NR 8040T 150M
NR 8040T 220M
NR 8040T 330M
NR 8040T 470M
NR 8040T 680M
NR 8040T 101M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.9
1.4
2.0
3.6
4.7
6.8
10
±30%
±30%
±30%
±30%
±30%
±30%
±20%
±20%
±20%
±20%
±20%
±20%
±20%
85
63
50
34
30
24
22
16
13
12
8
0.006
0.007
0.009
0.015
0.018
0.025
0.034
0.050
0.066
0.100
0.150
0.230
0.290
11,000
9,000
7,400
5,300
4,700
4,000
3,400
2,700
2,200
1,900
1,500
1,200
1,000
7,800
7,000
6,300
4,900
4,100
3,700
3,100
2,400
2,200
1,700
1,400
1,100
1,000
100
100
100
100
100
100
100
100
100
100
100
100
100
15
22
33
47
68
7
100
6
※) The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)
※) The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
47
SMD POWER INDUCTORS (NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE)
■PACKAGING
①Minimum Quantity
Standard Quantity [pcs]
Tape & Reel
2500
Standard Quantity [pcs]
Type
NRV2010
Type
NRS5010
Tape & Reel
1000
NRS2012
NRV2012
NRH2410
NRH2412
NR 3010
NRH3010
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
NR 4010
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
NRS5012
NRS5014
NRS5020
NRS5024
NRS5030
NR 5040
NRS5040
NRS6010
NR 6012
NRS6012
NRS6014
NR 6020
NRS6020
NR 6028
NRS6028
NR 6045
NRS6045
NRS8030
NR 8040
NRS8040
1000
2500
1000
2500
2500
800
2500
500
2000
1500
1000
1000
1000
2500
2000
2000
5000
4500
3500
2000
1500
1000
1000
②Tape Material
●Embossed Tape
Top tape
Chip Filled
Sprocket hole
Chip cavity
Base tape
Chip
③Taping dimensions
●Embossed tape 8mm wide (0.315 inches wide)
Chip cavity
Insertion pitch
F
Tape thickness
Type
NRV2010
A
B
T
K
2.2±0.1
2.2±0.1
0.25±0.05
1.3±0.1
NRS2012
NRV2012
NRH2410
NRH2412
NR 3010
NRH3010
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
(0.102±0.004)
(0.102±0.004)
(0.009±0.002)
(0.051±0.004)
2.6±0.1
2.6±0.1
0.25±0.05
1.3±0.1
(0.051±0.004)
1.4±0.1
(0.087±0.004)
(0.102±0.004)
(0.009±0.002)
4.0±0.1
(0.157±0.004)
(0.055±0.004)
1.6±0.1
3.2±0.1
3.2±0.1
0.3±0.05
(0.063±0.004)
(0.126±0.004)
(0.126±0.004)
(0.012±0.002)
1.9±0.1
(0.075±0.004)
Unit:mm(inch)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E02R01
●Embossed tape 12mm wide (0.47 inches wide)
Chip cavity
Insertion pitch
F
Tape thickness
Type
A
B
T
K
NR 4010
1.4±0.1
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
(0.055±0.004)
1.6±0.1
4.3±0.1
4.3±0.1
(0.169±0.004)
(0.169±0.004)
(0.063±0.004)
2.1±0.1
(0.083±0.004)
1.4±0.1
NRS5010
NRS5012
NRS5014
NRS5020
NRS5024
NRS5030
(0.055±0.004)
1.4±0.1
0.3±0.1
(0.012±0.004)
(0.055±0.004)
1.6±0.1
5.25±0.1
5.25±0.1
(0.207±0.004)
(0.207±0.004)
(0.063±0.004)
2.3±0.1
(0.091±0.004)
2.7±0.1
(0.106±0.004)
3.2±0.1
8.0±0.1
(0.315±0.004)
5.15±0.1
(0.203±0.004)
5.15±0.1
5.15±0.1
(0.203±0.004)
5.15±0.1
(0.126±0.004)
4.2±0.1
NR 5040
NRS5040
(0.203±0.004)
(0.203±0.004)
(0.165±0.004)
1.4±0.1
NRS6010
(0.055±0.004)
1.6±0.1
NR 6012
NRS6012
(0.063±0.004)
1.6±0.1
0.4±0.1
(0.016±0.004)
NRS6014
(0.063±0.004)
2.3±0.1
6.3±0.1
6.3±0.1
(0.248±0.004)
(0.248±0.004)
NR 6020
NRS6020
NR 6028
NRS6028
NR 6045
NRS6045
(0.090±0.004)
3.1±0.1
(0.122±0.004)
4.7±0.1
(0.185±0.004)
Unit:mm(inch)
●Embossed tape 16mm wide (0.63 inches wide)
Chip cavity
Insertion pitch
F
Tape thickness
Type
NRS8030
A
B
T
K
3.4±0.1
(0.134±0.004)
4.5±0.1
8.3±0.1
8.3±0.1
12.0±0.1
0.5±0.1
(0.327±0.004)
(0.327±0.004)
(0.472±0.004)
(0.020±0.004)
NR 8040
NRS8040
(0.177±0.004)
Unit:mm(inch)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E02R01
④Leader and Blank portion
●NR, NRH, NRS, NRV
⑤Reel size
Reel size (Reference values)
φd
Type
φD
W
NRV2010
NRS2012
NRV2012
NRH2410
NRH2412
NR 3010
NRH3010
NR 3012
NRH3012
NRV3012
NR 3015
NRS3015
NRS5010
NRS5012
NRS5014
NRS5020
NRS5030
NRS6010
NR 6012
NRS6012
NRS6014
180±0.5
60±1.0
10.0±1.5
(7.087±0.019)
(2.36±0.04)
(0.394±0.059)
180±3.0
60±2.0
14.0±1.5
(7.087±0.118)
(2.36±0.08)
(0.551±0.059)
Unit:mm(inch)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E02R01
Reel size (Reference values)
Type
φD
φd
t(max.)
W
NR 4010
NRS4010
NR 4012
NRS4012
NR 4018
NRS4018
NRS5024
NR 5040
NRS5040
NR 6020
NRS6020
NR 6028
NRS6028
NR 6045
NRS6045
NRS8030
NR 8040
NRS8040
18.5
13.5±1.0
(0.72)
(0.531±0.04)
330±3.0
80±2.0
(12.99±0.118)
(3.15±0.078)
22.5
17.5±1.0
(0.89)
(0.689±0.04)
Unit:mm(inch)
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as illustrated below.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_pack_e-E02R01
SMD inductor (NR□, NS series)
■RELIABILITY DATA
1. Operating Temperature Range
NR30/40/50/60/80, NRS20, NRV20/30,
NRH24/30 Type
-25~+120℃
NRS40/50/60/80 Type
NR10050 Type
-25~+125℃
-25~+105℃
-40~+125℃
Specified Value
NS101, NS125 Type
Test Methods and
Remarks
Including self-generated heat
2. Storage Temperature Range
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
-40~+85℃
NR10050 Type
NS101, NS125 Type
Test Methods and
Remarks
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type:
-5 to 40℃ for the product with taping.
3. Rated current
Specified Value
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Within the specified tolerance
NR10050 Type
NS101, NS125 Type
4. Inductance
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Within the specified tolerance
NR10050 Type
NS101, NS125 Type
Measuring equipment
Measuring frequency
: LCR Meter (HP 4285A or equivalent)
: Specified frequency
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type
:
Test Methods and
Remarks
Measuring equipment
Measuring frequency
NR10050 Type :
: LCR Meter (HP 4285A or equivalent)
: 100kHz, 1V
Measuring equipment
Measuring frequency
: LCR Meter (HP 4263A or equivalent)
: 100kHz, 1V
5. DC Resistance
Specified Value
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Within the specified tolerance
NR10050 Type
NS101, NS125 Type
Test Methods and
Remarks
Measuring equipment
: DC ohmmeter (HIOKI 3227 or equivalent)
6. Self resonance frequency
NR30/40/50/60/80, NRV30, NRH24/30,
NRS40/50/60/80 Type
Within the specified tolerance
-
Specified Value
NR10050 Type
NS101, NS125 Type
Test Methods and NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NR10050 Type :
Remarks Measuring equipment : Impedance analyzer/material analyzer(HP4291A or equivalent HP4191A, 4192A or equivalent)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E02R01
7. Temperature characteristic
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Inductance change : Within ±20%
Inductance change : Within ±15%
Specified Value
NR10050 Type
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type :
Measurement of inductance shall be taken at temperature range within -25℃~+85℃.
With reference to inductance value at +20℃., change rate shall be calculated.
NS101, NS125 Type :
Measurement of inductance shall be taken at temperature range within -40℃~+125℃.
With reference to inductance value at +20℃., change rate shall be calculated.
Change of maximum inductance deviation in step 1 to 5
Test Methods and
Remarks
Step
Temperature(℃)
20
1
2
3
4
5
Minimum operating temperature
20 (Standard temperature)
Maximum operating temperature
20
8. Resistance to flexure of substrate
NR30/40/50/60/80, NRV20/30,
No damage
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
-
NS101, NS125 Type
No damage
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating
until deflection of the test board reaches to 2 mm.
Test board size
: 100×40×1.0
Test board material
Solder cream thickness
: glass epoxy-resin
: 0.10mm (NR30, NRS20, NRH24/30, NRV20/30)
: 0.15mm(NR40/50/60/80, NRS40/50/60, NS101/125Type)
Test Methods and
Remarks
Land dimension
Type
A
0.65
0.7
0.8
1.2
1.5
1.6
1.8
B
0.7
0.75
1.4
1.6
2.1
3.1
3.8
C
Type
A
B
C
NRS20, NRV20
NRH24
2.0
2.0
2.7
3.7
4.0
5.7
7.5
NS101
NS125
2.5
2.5
5.6
8.6
3.2
3.2
C
NR30, NRV30, NRH30
NR40, NRS40
NR50, NRS50
NR60, NRS60
NR80, NRS80
A
A
B
9. Insulation resistance : between wires
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
-
NR10050 Type
NS101, NS125 Type
10. Insulation resistance : between wire and core
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
-
NR10050 Type
NS101, NS125 Type
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E02R01
11. Withstanding voltage : between wire and core
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
-
NR10050 Type
NS101, NS125 Type
12. Adhesion of terminal electrode
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
Shall not come off PC board
NR10050 Type
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
Applied force
Duration
: 10N to X and Y directions.
: 5s.
Test Methods and
Remarks
Solder cream thickness
: 0.10mm (NR30, NRS20, NRH24/30, NRV20/30)
: 0.15mm (NR40/50/60/80, NRS40/50/60, NS101/125Type)
NR10050 Type :
Applied force
Duration
: 5N to X and Y directions.
: 5s.
13. Resistance to vibration
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Inductance change : Within ±10%
Specified Value
NR10050 Type
No significant abnormality in appearance.
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
Then it shall be submitted to below test conditions.
Frequency Range
Total Amplitude
Sweeping Method
10~55Hz
1.5mm (May not exceed acceleration 196m/s2)
Test Methods and
Remarks
10Hz to 55Hz to 10Hz for 1min.
X
Time
Y
Z
For 2 hours on each X, Y, and Z axis.
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
14. Solderability
Specified Value
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
At least 90% of surface of terminal electrode is covered by new solder.
NR10050 Type
NS101, NS125 Type
The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table.
Flux : Methanol solution containing rosin 25%.
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type
Test Methods and
Remarks
Solder Temperature
Time
245±5℃
5±1.0 sec.
※Immersion depth : All sides of mounting terminal shall be immersed.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E02R01
15. Resistance to soldering heat
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Inductance change : Within ±10%
Specified Value
NR10050 Type
No significant abnormality in appearance.
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test sample shall be exposed to reflow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times.
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type, NS101/125 Type
Test Methods and
Remarks
Test board material
: glass epoxy-resin
Test board thickness : 1.0mm
NR10050 Type
Test board material
: glass epoxy-resin
Test board thickness : 1.6mm
16. Thermal shock
Specified Value
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Inductance change : Within ±10%
NR10050 Type
No significant abnormality in appearance.
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified
time by step 1 to step 4 as shown in below table in sequence. The temperature cycle shall be repeated 100 cycles.
Conditions of 1 cycle
Test Methods and
Remarks
Step
Temperature (℃)
-40±3
Duration (min)
30±3
1
2
3
4
Room temperature
+85±2
Within 3
30±3
Room temperature
Within 3
17. Damp heat
Specified Value
NR30/40/50/60/80, NRV20/30,
Inductance change : Within ±10%
NRH24/30, NRS20/40/50/60/80 Type
No significant abnormality in appearance.
NR10050 Type
-
Inductance change : Within ±10%
NS101, NS125 Type
No significant abnormality in appearance.
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
Test Methods and
Remarks
The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table.
Temperature
Humidity
Time
60±2℃
90~95%RH
500+24/-0 hour
18. Loading under damp heat
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Inductance change : Within ±10%
Specified Value
NR10050 Type
No significant abnormality in appearance.
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow.
The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current
continuously as shown in below table.
Test Methods and
Remarks
Temperature
Humidity
60±2℃
90~95%RH
Rated current
500+24/-0 hour
Applied current
Time
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E02R01
19. Low temperature life test
NR30/40/50/60/80, NRV20/30,
NRH24/30, NRS20/40/50/60/80 Type
Inductance change : Within ±10%
Specified Value
NR10050 Type
No significant abnormality in appearance.
NS101, NS125 Type
NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type :
The test samples shall be soldered to the test board by the reflow. After that, the test samples shall be placed at test conditions as shown
in below table.
Test Methods and
Remarks
Temperature
Time
-40±2℃
500+24/-0 hour
20. High temperature life test
NR30/40/50/60/80, NRV20/30,
-
NRH24/30, NRS20/40/50/60/80 Type
Specified Value
NR10050 Type
-
-
NS101, NS125 Type
NR10050 Type :
Test Methods and
Remarks
Temperature
Time
105±3℃
500+24/-0 hour
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs.
21. Loading at high temperature life test
NR30/40/50/60/80, NRV20/30,
Inductance change : Within ±10%
NRH24/30, NRS20/40/50/60/80 Type
No significant abnormality in appearance.
Specified Value
NR10050 Type
-
Inductance change : Within ±10%
NS101, NS125 Type
No significant abnormality in appearance.
NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NS12555, NS12565, NS12575 Type :
The test samples shall be soldered to the test board by the reflow soldering.
Test Methods and
Remarks
Temperature
Applied current
Time
85±2℃
Rated current
500+24/-0 hour
22. Standard condition
NR30/40/50/60/80, NRV20/30,
Standard test condition :
NRH24/30, NRS20/40/50/60/80 Type
Unless otherwise specified, temperature is 20±15℃ and 65±20%of
relative humidity.
NR10050 Type
Specified Value
When there is any question concerning measurement result: In order to
provide correlation data, the test shall be condition of 20±2℃ of
temperature, 65±5% relative humidity.
NS101, NS125 Type
Inductance is in accordance with our measured value.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_smd_NR_NS_reli_e-E02R01
SMD inductor (NR□, NS series)
■PRECAUTIONS
1. Circuit Design
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment,
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear
control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
Precautions
2. PCB Design
Precautions
◆Land pattern design
1. Please refer to a recommended land pattern.
◆Land pattern design
Technical
Surface Mounting
considerations
・ Mounting and soldering conditions should be checked beforehand.
・ Applicable soldering process to this products is reflow soldering only.
3. Considerations for automatic placement
◆Adjustment of mounting machine
Precautions
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
◆Adjustment of mounting machine
considerations
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
2. The product shall be used reflow soldering only.
3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering
heat, soldering etc sufficiently.
Precautions
◆Recommended conditions for using a soldering iron (NR10050 Type)
・ Put the soldering iron on the land-pattern.
・ Soldering iron's temperature - Below 350℃
・ Duration - 3 seconds or less
・ The soldering iron should not directly touch the inductor.
◆Reflow soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
・NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type
Recommended reflow condition (Pb free solder)
Technical
considerations
5. Cleaning
Precautions
◆Cleaning conditions
1. Washing by supersonic waves shall be avoided.
Technical
◆Cleaning conditions
considerations
1. If washed by supersonic waves, the products might be broken.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/)
i_smd_NR_NS_prec_e-E02R01
6. Handling
◆Handling
1. Keep the product away from all magnets and magnetic objects.
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
Precautions
1. Please do not give the product any excessive mechanical shocks.
2. Please do not add any shock and power to a product in transportation.
◆Pick-up pressure
1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part.
◆Packing
1. Please avoid accumulation of a packing box as much as possible.
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Breakaway PC boards (splitting along perforations)
1. The position of the product on PCBs shall be carefully considered to minimize the stress caused from splitting of the PCBs.
◆Mechanical considerations
Technical
1. There is a case to be damaged by a mechanical shock.
2. There is a case to be broken by the handling in transportation.
◆Pick-up pressure
considerations
1. Damage and a characteristic can vary with an excessive shock or stress.
◆Packing
1. If packing boxes are accumulated, that could cause a deformation on packing tapes or a damage on the products.
7. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
・ Recommended conditions
Ambient temperature : -5~40℃
Precautions
Humidity : Below 70% RH
・ The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may
decrease as time passes.
For this reason, product should be used within 6 months from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
◆Storage
Technical
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
considerations
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/)
i_smd_NR_NS_prec_e-E02R01
NRH2412T100MNGH 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
NRH2412T100MNGH8 | TAIYO YUDEN | SMD Power Inductors for Telecommunications Infrastructure and Industrial Equipment / Medical Devices (NR series H type) | 获取价格 | |
NRH2412T100MNGHV | TAIYO YUDEN | General Purpose Inductor, 10uH, 20%, 1 Element, SMD, 0909, CHIP, 0909, HALOGEN FREE AND ROHS COMPLIANT | 获取价格 | |
NRH2412T1R0NNGH | TAIYO YUDEN | SMD POWER INDUCTORS(NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE) | 获取价格 | |
NRH2412T1R0NNGH8 | TAIYO YUDEN | SMD Power Inductors for Telecommunications Infrastructure and Industrial Equipment / Medical Devices (NR series H type) | 获取价格 | |
NRH2412T1R0NNGHV | TAIYO YUDEN | General Purpose Inductor, 1uH, 30%, 1 Element, SMD, 0909, CHIP, 0909, HALOGEN FREE AND ROHS COMPLIANT | 获取价格 | |
NRH2412T1R5NNGH | TAIYO YUDEN | SMD POWER INDUCTORS(NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE) | 获取价格 | |
NRH2412T1R5NNGH8 | TAIYO YUDEN | SMD Power Inductors for Telecommunications Infrastructure and Industrial Equipment / Medical Devices (NR series H type) | 获取价格 | |
NRH2412T1R5NNGHV | TAIYO YUDEN | SMD Power Inductors for Automotive | 获取价格 | |
NRH2412T2R2MNGH | TAIYO YUDEN | SMD POWER INDUCTORS(NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE) | 获取价格 | |
NRH2412T2R2MNGH8 | TAIYO YUDEN | SMD Power Inductors for Telecommunications Infrastructure and Industrial Equipment / Medical Devices (NR series H type) | 获取价格 |
NRH2412T100MNGH 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6